Video game cartridge cleaner5/26/2023 Now, use paper towel or cloth and wipe wet areas. You can already see Q-tips is getting dirty. ![]() Also, try not to touch or brush any parts on circuit board while brushing.Īfter you brush it, use wet Q-Tip and scrub the connection again. You may be able to use rubber gloves if you want to be very safe side. You can do it simply by touching the ground. Then, hold side of the circuit board and scrub it with brass metal brush several times throughout the connection.Ĭaution: Before you touch the circuit board, make sure you release static electricity from your body. The key here is make dirty part wet to soften it. You can see how dirty the connection is from photos.įirst, soak Q-tips into rubbing alcohol. It is extremely hard to remove a screw with stripped head. You don’t want to strip the head of screws. Those screws are very old and can be very fragile. ![]() There is a stainless steel brush also but I use brass one since brass is softer than stainless steel. Sorry mine is heavily used and doesn’t look pretty. You can buy Brass metal brush at your local hardware store or online shop like Amazon. It is good to have if you are a retro game lover since a lot of retro games comes with this type of screws. I carry 3.8mm security screw bit if you don’t have one.ģ.8mm & 4.5mm Set of 2 Steel Security Screwdriver Bit ![]() I cannot be responsible for any damages caused by this method. How to clean SFC/SNES cartridge connection Part1 (Light Cleaning)īefore you try this heavy cleaning method.Ĭaution: This is really the last resort and please try this on your own risk. If you haven’t try light cleaning method, please read After you tried light cleaning a couple of times and still it doesn’t work, there is one last resort.
0 Comments
Leave a Reply. |